Nokia 500 fbus Pinout

Nokia 500 fbus Pinout

--------------------------------------------------------------------------------

..........................................................................For More Information Continue Visit on http://gsmworldfree.blogspot.com/ More Use full Information Coming Soon. Wait For More New Information.And Post Your Comments In All Post.Email:ajcellpoint@gmail.com Continue>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>

http://feeds.feedburner.com/blogspot/GaEVt

08:14 - By ASLOM MOBILE 0

Nokia 5000 Signal problem,Nokia 5000 Network problemNokia 5000 Signal problem,Nokia 5000 Network problem

Here's a solution to fix Nokia 5000 Signal problem related issues like no signal being intercepts, show a dropping signal on the display. This solution simply shows the location of the components and tests spots to check with when trying to fix nokia 5000 signal loss.

The solution picture guide indicated with numbers are the test spots and components might possibly get damaged if the signal loss occurs. In most  cases the RF signal is loss or become weak if the RF IC and the RF power amplifier IC (PA IC) possibly damaged. You can check the corresponding power supply voltage first before attempting to rework or replace it with a new replacement spare component parts. ..........................................................................For More Information Continue Visit on http://gsmworldfree.blogspot.com/ More Use full Information Coming Soon. Wait For More New Information.And Post Your Comments In All Post.Email:ajcellpoint@gmail.com Continue>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>

06:32 - By ASLOM MOBILE 0

Nokia 5000 Signal problem,Nokia 5000 Network problemNokia 5000 Signal problem,Nokia 5000 Network problem

Here's a solution to fix Nokia 5000 Signal problem related issues like no signal being intercepts, show a dropping signal on the display. This solution simply shows the location of the components and tests spots to check with when trying to fix nokia 5000 signal loss.

The solution picture guide indicated with numbers are the test spots and components might possibly get damaged if the signal loss occurs. In most  cases the RF signal is loss or become weak if the RF IC and the RF power amplifier IC (PA IC) possibly damaged. You can check the corresponding power supply voltage first before attempting to rework or replace it with a new replacement spare component parts. ..........................................................................For More Information Continue Visit on http://gsmworldfree.blogspot.com/ More Use full Information Coming Soon. Wait For More New Information.And Post Your Comments In All Post.Email:ajcellpoint@gmail.com Continue>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>

06:32 - By ASLOM MOBILE 0

Nokia 5000 Display problem Solution

If you try to fix nokia 5000 display problem issues like white screen, blue screen, dark or black screen other related display problems, this solution may help on solving those hardware failures above, if the said damaged device already installed new lcd display replacement on it but the problem still exists and nothing happens.

This solution guide will show you the pin configuration of the LCD display connector of where and which particular components it is being connected for an easy tracing procedure method.
The LCD display circuit comes with a display driver IC, which is a good  spot to start to check, test, rework and replace. ..........................................................................For More Information Continue Visit on http://gsmworldfree.blogspot.com/ More Use full Information Coming Soon. Wait For More New Information.And Post Your Comments In All Post.Email:ajcellpoint@gmail.com Continue>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>

06:30 - By ASLOM MOBILE 0

Nokia 5000 Display problem Solution

If you try to fix nokia 5000 display problem issues like white screen, blue screen, dark or black screen other related display problems, this solution may help on solving those hardware failures above, if the said damaged device already installed new lcd display replacement on it but the problem still exists and nothing happens.

This solution guide will show you the pin configuration of the LCD display connector of where and which particular components it is being connected for an easy tracing procedure method.
The LCD display circuit comes with a display driver IC, which is a good  spot to start to check, test, rework and replace. ..........................................................................For More Information Continue Visit on http://gsmworldfree.blogspot.com/ More Use full Information Coming Soon. Wait For More New Information.And Post Your Comments In All Post.Email:ajcellpoint@gmail.com Continue>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>

06:30 - By ASLOM MOBILE 0

Nokia 5000 charging ways

Here's the nokia 5000 charging problem repair solution guide.
The picture shows the particular components may cause the problem if damaged.
The is also shows the charger voltage line paths started from the charging pin connector to the fuse, coil, diode and capacitor and down deeper to the power supply IC's corresponding terminals, in which the voltage feeds through to the battery terminal connector.

Nokia 5000 charging ways

..........................................................................For More Information Continue Visit on http://gsmworldfree.blogspot.com/ More Use full Information Coming Soon. Wait For More New Information.And Post Your Comments In All Post.Email:ajcellpoint@gmail.com Continue>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>

06:29 - By ASLOM MOBILE 0

Nokia 5000 charging ways

Here's the nokia 5000 charging problem repair solution guide.
The picture shows the particular components may cause the problem if damaged.
The is also shows the charger voltage line paths started from the charging pin connector to the fuse, coil, diode and capacitor and down deeper to the power supply IC's corresponding terminals, in which the voltage feeds through to the battery terminal connector.

Nokia 5000 charging ways

..........................................................................For More Information Continue Visit on http://gsmworldfree.blogspot.com/ More Use full Information Coming Soon. Wait For More New Information.And Post Your Comments In All Post.Email:ajcellpoint@gmail.com Continue>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>

06:29 - By ASLOM MOBILE 0

5000 Mouthpiece problem 5000 Mic Problem 5000 Microphone Problem 5000 Mic Ways 5000 Microphones Ways 5000 Mic Jumpers 5000 Microphone Jumpers

Here's the solution which help to repair Nokia 5000 Mouthpiece microphone failure problem.
This manual or repair guide shows the microphone's components connection on the main PCB board assembly (printed circuit board). Including the terminal connection within the inner solder ball terminals of the power IC.

Repair Tips and procedure: 
1. check the mouthpiece microphone, replace if found damaged
2. check the microphone's terminal pads free from dirt and corrosion.
3. check the two filter coils, replace if found open or damaged.
4. check replace the capacitors near the power supply IC.
5. trace the line paths and if found open or cut, apply a tiniest magnetic jumper wire on it , its a recycling method but anyway it is very useful.

Note:  It need expertise on this next procedures, if the solutions above does not solve the problem.
doing this process without related experience might end up killing the phone.
1. reflow or reheat the power IC using a Hot Air Gun, with proper controlled heat temperature.
2. remove the power IC, check each line paths indicated on the repair picture solution to each corresponding connected components.
3. Rework or reball the power IC's solder balls.


We personally tried and tested this solution and serve as our guide
for the following questions we search with.
5000 Mouthpiece problem
5000 Mic Problem
5000 Microphone Problem
5000 Mic Ways
5000 Microphones Ways
5000 Mic Jumpers
5000 Microphone Jumpers
..........................................................................For More Information Continue Visit on http://gsmworldfree.blogspot.com/ More Use full Information Coming Soon. Wait For More New Information.And Post Your Comments In All Post.Email:ajcellpoint@gmail.com Continue>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>

06:28 - By ASLOM MOBILE 0

Nokia 5000,5000d keypad backlight LED problemNokia 5000,5000d keypad backlight LED problem

 A repair guide solutions covers to repair Nokia 5000,5000d keypad backlight LED problem.
This repair guide shows the particular locations of the components that might possibly damaged when the Keypad backlight LED failed to light up.

The LED driver ic is mounted near at the bottom side of the PCB board assembly. This chip drive and sustain the voltage and current to light the keypad backlight  LED's, if the supply voltage feeds from the cell phone battery is cut or missing this chip will unable to function.
The the output voltage of the led driver IC is connected to pin 12 (positive) and pin 13 (negative) of the keypad  interface connector. ..........................................................................For More Information Continue Visit on http://gsmworldfree.blogspot.com/ More Use full Information Coming Soon. Wait For More New Information.And Post Your Comments In All Post.Email:ajcellpoint@gmail.com Continue>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>

06:28 - By ASLOM MOBILE 0

5000 Mouthpiece problem 5000 Mic Problem 5000 Microphone Problem 5000 Mic Ways 5000 Microphones Ways 5000 Mic Jumpers 5000 Microphone Jumpers

Here's the solution which help to repair Nokia 5000 Mouthpiece microphone failure problem.
This manual or repair guide shows the microphone's components connection on the main PCB board assembly (printed circuit board). Including the terminal connection within the inner solder ball terminals of the power IC.

Repair Tips and procedure: 
1. check the mouthpiece microphone, replace if found damaged
2. check the microphone's terminal pads free from dirt and corrosion.
3. check the two filter coils, replace if found open or damaged.
4. check replace the capacitors near the power supply IC.
5. trace the line paths and if found open or cut, apply a tiniest magnetic jumper wire on it , its a recycling method but anyway it is very useful.

Note:  It need expertise on this next procedures, if the solutions above does not solve the problem.
doing this process without related experience might end up killing the phone.
1. reflow or reheat the power IC using a Hot Air Gun, with proper controlled heat temperature.
2. remove the power IC, check each line paths indicated on the repair picture solution to each corresponding connected components.
3. Rework or reball the power IC's solder balls.


We personally tried and tested this solution and serve as our guide
for the following questions we search with.
5000 Mouthpiece problem
5000 Mic Problem
5000 Microphone Problem
5000 Mic Ways
5000 Microphones Ways
5000 Mic Jumpers
5000 Microphone Jumpers
..........................................................................For More Information Continue Visit on http://gsmworldfree.blogspot.com/ More Use full Information Coming Soon. Wait For More New Information.And Post Your Comments In All Post.Email:ajcellpoint@gmail.com Continue>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>

06:28 - By ASLOM MOBILE 0

Nokia 5000,5000d keypad backlight LED problemNokia 5000,5000d keypad backlight LED problem

 A repair guide solutions covers to repair Nokia 5000,5000d keypad backlight LED problem.
This repair guide shows the particular locations of the components that might possibly damaged when the Keypad backlight LED failed to light up.

The LED driver ic is mounted near at the bottom side of the PCB board assembly. This chip drive and sustain the voltage and current to light the keypad backlight  LED's, if the supply voltage feeds from the cell phone battery is cut or missing this chip will unable to function.
The the output voltage of the led driver IC is connected to pin 12 (positive) and pin 13 (negative) of the keypad  interface connector. ..........................................................................For More Information Continue Visit on http://gsmworldfree.blogspot.com/ More Use full Information Coming Soon. Wait For More New Information.And Post Your Comments In All Post.Email:ajcellpoint@gmail.com Continue>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>

06:28 - By ASLOM MOBILE 0

Nokia 5000 power ON-OFF switch key line is connected to the pin number 9, while the 5000 keypad LED backlight is on pin 12 and 13, then the rest left for ground lines of the keypad pin connector .

Here's the solution guide to fix Nokia 5000 keypad malfunction. In this picture guide its shows the keypads tracing line paths (keypad ways). This repair solution may help if the keypads membrane is okay but the keypads keys does not work or failed to initiate.
This also shows the 5000 keypad IC jumper ways, for temporarily test procedure before replacing with a new keypad filter IC spare parts. Just follow the colored lines on the picture  to trace each corresponding lines across the keypad pin connector socket on the main PCB board.

The Nokia 5000 power ON-OFF switch key line is connected to the pin number 9, while the 5000 keypad LED backlight is on pin 12 and 13, then the rest left for ground lines of the keypad pin connector .
..........................................................................For More Information Continue Visit on http://gsmworldfree.blogspot.com/ More Use full Information Coming Soon. Wait For More New Information.And Post Your Comments In All Post.Email:ajcellpoint@gmail.com Continue>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>

06:27 - By ASLOM MOBILE 0

Nokia 5000 power ON-OFF switch key line is connected to the pin number 9, while the 5000 keypad LED backlight is on pin 12 and 13, then the rest left for ground lines of the keypad pin connector .

Here's the solution guide to fix Nokia 5000 keypad malfunction. In this picture guide its shows the keypads tracing line paths (keypad ways). This repair solution may help if the keypads membrane is okay but the keypads keys does not work or failed to initiate.
This also shows the 5000 keypad IC jumper ways, for temporarily test procedure before replacing with a new keypad filter IC spare parts. Just follow the colored lines on the picture  to trace each corresponding lines across the keypad pin connector socket on the main PCB board.

The Nokia 5000 power ON-OFF switch key line is connected to the pin number 9, while the 5000 keypad LED backlight is on pin 12 and 13, then the rest left for ground lines of the keypad pin connector .
..........................................................................For More Information Continue Visit on http://gsmworldfree.blogspot.com/ More Use full Information Coming Soon. Wait For More New Information.And Post Your Comments In All Post.Email:ajcellpoint@gmail.com Continue>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>

06:27 - By ASLOM MOBILE 0

Nokia 5000 ON/OFF switch key tracing guide Power Switch Jumper Ways

If Nokia 5000 will unable to power up when switching it ON even the battery is at full charge or it shows charging  indication on the LCD screen display but fails to power up. The problem may happen or occurs if the keypad membrane is corroded or the power ON-OFF switch line is cut or damaged due to water damaged or suffered from being accidentally dropped. This solution will help to trace the line paths across from the key switch pad to the particular components of which it is being connected.

Nokia 5000 ON/OFF switch key tracing guide

-

Power Switch Jumper Ways

..........................................................................For More Information Continue Visit on http://gsmworldfree.blogspot.com/ More Use full Information Coming Soon. Wait For More New Information.And Post Your Comments In All Post.Email:ajcellpoint@gmail.com Continue>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>

06:26 - By ASLOM MOBILE 0

Nokia 5000 ON/OFF switch key tracing guide Power Switch Jumper Ways

If Nokia 5000 will unable to power up when switching it ON even the battery is at full charge or it shows charging  indication on the LCD screen display but fails to power up. The problem may happen or occurs if the keypad membrane is corroded or the power ON-OFF switch line is cut or damaged due to water damaged or suffered from being accidentally dropped. This solution will help to trace the line paths across from the key switch pad to the particular components of which it is being connected.

Nokia 5000 ON/OFF switch key tracing guide

-

Power Switch Jumper Ways

..........................................................................For More Information Continue Visit on http://gsmworldfree.blogspot.com/ More Use full Information Coming Soon. Wait For More New Information.And Post Your Comments In All Post.Email:ajcellpoint@gmail.com Continue>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>

06:26 - By ASLOM MOBILE 0

Serve as quick repair guide for the following: 5000 Speaker Problem, 5000 Speaker Ways, 5000 Speaker Jumpers, 5000 Earpiece Problem, 5000 Earpiece Ways 5000 Earpiece Jumpers

Here's a  repair guide, a simple solution to fix and repair Nokia 5000 , 5000D earpiece speaker problem. this solutions shows the earpiece components connection line paths ( speaker ways), Including the inner connection beneath the terminals of power management IC (power IC).



Repair hints:
 1. Check or replace the earpiece  speaker
2. Check or replace the coils and capacitors.
3. check the line pats to each corresponding component's connections
     from the coils to the speaker terminals.
4. Remove the power IC, check the line pines of ball bumps pin P11 and pin P12, to the coils
5. Rework or reball   the Power IC.

Serve as quick repair guide for the following:
5000 Speaker Problem,
5000 Speaker Ways,
5000 Speaker Jumpers,
5000 Earpiece Problem,
5000 Earpiece Ways
5000 Earpiece Jumpers
..........................................................................For More Information Continue Visit on http://gsmworldfree.blogspot.com/ More Use full Information Coming Soon. Wait For More New Information.And Post Your Comments In All Post.Email:ajcellpoint@gmail.com Continue>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>

06:25 - By ASLOM MOBILE 0

Serve as quick repair guide for the following: 5000 Speaker Problem, 5000 Speaker Ways, 5000 Speaker Jumpers, 5000 Earpiece Problem, 5000 Earpiece Ways 5000 Earpiece Jumpers

Here's a  repair guide, a simple solution to fix and repair Nokia 5000 , 5000D earpiece speaker problem. this solutions shows the earpiece components connection line paths ( speaker ways), Including the inner connection beneath the terminals of power management IC (power IC).



Repair hints:
 1. Check or replace the earpiece  speaker
2. Check or replace the coils and capacitors.
3. check the line pats to each corresponding component's connections
     from the coils to the speaker terminals.
4. Remove the power IC, check the line pines of ball bumps pin P11 and pin P12, to the coils
5. Rework or reball   the Power IC.

Serve as quick repair guide for the following:
5000 Speaker Problem,
5000 Speaker Ways,
5000 Speaker Jumpers,
5000 Earpiece Problem,
5000 Earpiece Ways
5000 Earpiece Jumpers
..........................................................................For More Information Continue Visit on http://gsmworldfree.blogspot.com/ More Use full Information Coming Soon. Wait For More New Information.And Post Your Comments In All Post.Email:ajcellpoint@gmail.com Continue>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>

06:25 - By ASLOM MOBILE 0